View source for Nighthawk's check point / firewall command scratch pad

== model number ==


== equivalent of linux ip route get ==
iclid >sh route dest 192.168.1.1


== get IP appliance model number (ipso 6.x and above) ==

 clish -c "show asset hardware" | grep Platform | awk '{print $2}'

== mds crap ==
run on p-1 after upgrade w/name change
 mdsquerydb NetworkObjects |grep firewall-name
search CLMs for last gzipped log
 for CLM in *; do ls -lt $CLM/CPsuite-R75.20/fw1/log/*.log.gz | grep -m 1 log.gz; done

== misc crap ==

'''bootmgr upgrade cmds'''

'''ipso 6.x'''
upgrade_bootmgr /var/emhome/admin/nkipflash-6.2-GA029a02.bin

'''ipso 4.1(needs device parameter)'''

to check boot device number...
  ipsctl kern:bootmgr:bmdev

 upgrade_bootmgr /dev/wd1 /var/emhome/admin/nkipflash-6.2-GA029a02.bin

nokias in /etc/hosts on authric
 cat /etc/hosts | grep -v eth | awk '{print $2}' | grep '^k...' |more

ping test 0 / 1 after waiting 2 seconds
 ping -q -c 1 -W 2 host | grep received | awk -F "," '{print $2}' | awk '{print $1}'

get count of sync packets sent on a remote firewall via ssh
 ssh -q -l admin firewallhostname "fw ctl pstat | grep -A 1 \"Sync packets sent\" | grep total" | awk '{print $3}' | awk -F , '{print $1}'


[[category:nokia]]