View source for CMM Shelf Manager CLI Command Summary

<TABLE CLASS="Titled" SUMMARY="Table that is numbered and titled" BORDER="1" CELLPADDING="5" CELLSPACING="0" DIR="LTR"><CAPTION CLASS="TableCaptionA-Wide">  Shelf Manager CLI Command Summary  </CAPTION>
<TR>
<TH SCOPE="COL" ROWSPAN="1" COLSPAN="1" BGCOLOR="#CCCCCC">
<P CLASS="TableHead">Command
</P>
</TH>
<TH SCOPE="COL" ROWSPAN="1" COLSPAN="1" BGCOLOR="#CCCCCC">
<P CLASS="TableHead">Parameters
</P>
</TH>
<TH SCOPE="COL" ROWSPAN="1" COLSPAN="1" BGCOLOR="#CCCCCC">
<P CLASS="TableHead">Description
</P>
</TH>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">activate</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address
</P>
<P CLASS="TableText">FRU device ID
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Activates the specified FRU.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">alarm</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">alarm type
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Activates or clears Telco alarms.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">board -v</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">slot number (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows information about blade servers.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">boardreset</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">slot number
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Resets the specified ATCA blade server.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">console</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">slot number
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Opens a console session on the node blade server in the specified slot.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">deactivate</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address
</P>
<P CLASS="TableText">FRU device ID
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Deactivates the specified FRU.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">exit</KBD>|<KBD CLASS="Command">quit</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Exits from the interpreter in interactive mode.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">fans</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address (optional)
</P>
<P CLASS="TableText">FRU device ID (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows information about fans.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">fru</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address (optional)
</P>
<P CLASS="TableText">FRU device ID (optional)
</P>
<P CLASS="TableText">FRU type (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows information about one or a group of FRUs in the shelf; FRUs are selected by type or by the parent IPM controller.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">frudata</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address (optional)
</P>
<P CLASS="TableText">FRU device ID (optional)
</P>
<P CLASS="TableText">block/byte offset (optional)
</P>
<P CLASS="TableText">data (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Provides raw access to the FRU. Information on the specified FRU.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">frudatar</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address
</P>
<P CLASS="TableText">FRU device ID
</P>
<P CLASS="TableText">File name
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Reads the FRU data area of the specified FRU and stores the data in the specified file.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">frudataw</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address
</P>
<P CLASS="TableText">FRU device ID
</P>
<P CLASS="TableText">File name
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Writes the FRU data in the specified file into the FRU data area of the specified FRU.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">fruinfo -v</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address
</P>
<P CLASS="TableText">FRU device ID
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Provides user-friendly FRU Information output.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">getthreshold</KBD> | <KBD CLASS="Command">threshold</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address (optional)
</P>
<P CLASS="TableText">sensor name (optional)
</P>
<P CLASS="TableText">sensor number (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows threshold information about a specific sensor.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">help</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows the list of supported commands.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">ipmc</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows information about one or all IPM controllers in the shelf.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">minfanlevel</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">fan level (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows or sets the minimum fan level.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">ps -ef |grep hp</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><STRONG></STRONG>&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Checks the <KBD CLASS="Command">openhpi</KBD> status.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">sensor</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address (optional)
</P>
<P CLASS="TableText">sensor name (optional)
</P>
<P CLASS="TableText">sensor number (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows information about one or a group of sensors; sensors are selected by IPM controller address, number or name.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">sensordata</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address (optional)
</P>
<P CLASS="TableText">sensor name (optional)
</P>
<P CLASS="TableText">sensor number (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows value information for a specific sensor.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">sensorread</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address
</P>
<P CLASS="TableText">sensor number
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows raw value information for a specific sensor (ignoring any Sensor Data Record describing the sensor).
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">setfanlevel</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address
</P>
<P CLASS="TableText">FRU device ID
</P>
<P CLASS="TableText">level
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Sets a new level for the fan controlled by the specified FRU.
</P>
<P CLASS="TableText">Use <KBD CLASS="Command">clia setfanlevel 20 3 5</KBD> to get the fans to slow down.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">setfanpolicy</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address
</P>
<P CLASS="TableText">FRU device ID
</P>
<P CLASS="TableText">action to be taken: <KBD CLASS="Command">ENABLE</KBD> or <KBD CLASS="Command">DISABLE</KBD> 
</P>
<P CLASS="TableText">timeout (optional)
</P>
<P CLASS="TableText">site type (optional)
</P>
<P CLASS="TableText">site number (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Enables or disables fan trays for cooling management in addition to the Fan Geography record if this one is presented in the Shelf FRU.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">setthreshold</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">IPMB address 
</P>
<P CLASS="TableText">sensor name
</P>
<P CLASS="TableText">sensor number 
</P>
<P CLASS="TableText">threshold type
</P>
<P CLASS="TableText">threshold value
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Changes a specific threshold value (upper/lower, critical/non-critical/non-recoverable) for a specific sensor.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">setuserlabel</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">shelf name
</P>
<P CLASS="TableText">slot number name
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Configures user assigned names for the shelf and the blade servers. Blade server names are assigned to slot numbers. 
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">shelf</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">subcommand, with its parameters
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows general information about the shelf; several subcommands allow setting shelf attributes and getting additional information about specific areas.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">shelfaddress</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shelf Address string (optional)
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Gets or sets the Shelf Address field of the Address Table within Shelf FRU Information.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">shelf address_table
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><STRONG></STRONG>&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows the address table record in the shelf FRU info with shelf address and list of address table entries. For each entry, shows hardware address, site type, and site number.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">shelf cooling_state
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><STRONG></STRONG>&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows the current cooling state of the shelf with normal, minor, major, and critical alert information.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">shelf fans_state
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><STRONG></STRONG>&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows the current state of the fan techometers in the shelf with normal, minor, major and critical alert information.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">shmstatus</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows the Shelf Manager Active/Backup status. 
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">showhost</KBD> 
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">slot-number 
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Displays version information about the firmware on certain Netra CP3x60 node blade servers.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">showunhealthy</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows the unhealthy components of the shelf.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">switchover</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Initiates a switchover to the backup Shelf Manager.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">terminate</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Terminates the Shelf Manager without rebooting the shelf management card.
</P>
</TD>
</TR>
<TR>
<TD SCOPE="ROW" ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText"><KBD CLASS="Command">version</KBD>
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">&nbsp;
</P>
</TD>
<TD ROWSPAN="1" COLSPAN="1">
<P CLASS="TableText">Shows the Shelf Manager version information.
</P>
</TD>
</TR>
</TABLE>