Difference between revisions of "Nokia IPSO clish config example"
m (Nighthawk moved page Nokia clish config example to Nokia IPSO clish config example without leaving a redirect) |
|||
| (3 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
| − | clish -c "set interface | + | <br>clish -c "set interface eth1 active on" |
| + | <br>clish -c "set interface eth1 duplex full" | ||
| + | <br>clish -c "set interface eth1 speed 1000M" | ||
| + | <br>clish -c "add interface eth1c0 address 10.0.0.2/28" | ||
| − | |||
| − | clish -c "set | + | <br>clish -c "set mcvr vrid 10 priority 95" |
| + | <br>clish -c "set mcvr vrid 10 priority-delta 10" | ||
| + | <br>clish -c "add mcvr vrid 10 backup-address 10.0.0.1" | ||
| − | + | <br>clish -c "set interface eth-s1p2 active on" | |
| − | + | <br>clish -c "set interface eth-s1p2 duplex full" | |
| − | clish -c "set interface eth-s1p2 active on" | + | <br>clish -c "set interface eth-s1p2 speed 1000M" |
| − | + | <br>clish -c "add interface eth-s1p2 vlanid 100" <<< this creates logical interface named eth-s1p2c1 | |
| − | clish -c "set interface eth-s1p2 duplex full" | + | <br>clish -c "add interface eth-s1p2c1 address 192.168.1.2/27" |
| − | + | <br>clish -c "add interface eth-s1p2 vlanid 200" | |
| − | clish -c "set interface eth-s1p2 speed 1000M" | + | <br>clish -c "add interface eth-s1p2c2 address 192.168.100.2/27" |
| − | + | ||
| − | clish -c "add interface eth-s1p2 vlanid 100" | + | |
| − | + | ||
| − | clish -c "add interface eth-s1p2c1 address 192.168.1. | + | |
| − | + | ||
| − | + | ||
| − | clish -c " | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | clish -c "add | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| + | <br>clish -c "add mcvr vrid 10 backup-address 192.168.1.1" | ||
| + | <br>clish -c "add mcvr vrid 10 backup-address 192.168.100.1" | ||
echo "adding routes" | echo "adding routes" | ||
| − | |||
clish -c "set static-route default nexthop gateway address 10.0.0.1 priority 1 on" | clish -c "set static-route default nexthop gateway address 10.0.0.1 priority 1 on" | ||
| + | <br>clish -c "set static-route 10.124.0.0/15 nexthop gateway address 10.0.0.1 on" | ||
| − | + | clish -c "add arpproxy address 192.168.1.10 macaddress 00:00:5e:00:01:69" | |
| − | + | ||
| − | clish -c "add arpproxy address | + | |
| − | + | ||
clish -c "set vrrp accept-connections on" | clish -c "set vrrp accept-connections on" | ||
| − | + | <br>clish -c "set vrrp monitor-firewall off" | |
| − | clish -c "set vrrp monitor-firewall off" | + | <br>clish -c "set vrrp coldstart-delay 90" |
| − | + | <br>clish -c "save config" | |
| − | clish -c "set vrrp coldstart-delay 90" | + | |
| − | + | ||
| − | clish -c "save config" | + | |
[[category:nokia]] | [[category:nokia]] | ||
Latest revision as of 16:55, 15 February 2017
clish -c "set interface eth1 active on"
clish -c "set interface eth1 duplex full"
clish -c "set interface eth1 speed 1000M"
clish -c "add interface eth1c0 address 10.0.0.2/28"
clish -c "set mcvr vrid 10 priority 95"
clish -c "set mcvr vrid 10 priority-delta 10"
clish -c "add mcvr vrid 10 backup-address 10.0.0.1"
clish -c "set interface eth-s1p2 active on"
clish -c "set interface eth-s1p2 duplex full"
clish -c "set interface eth-s1p2 speed 1000M"
clish -c "add interface eth-s1p2 vlanid 100" <<< this creates logical interface named eth-s1p2c1
clish -c "add interface eth-s1p2c1 address 192.168.1.2/27"
clish -c "add interface eth-s1p2 vlanid 200"
clish -c "add interface eth-s1p2c2 address 192.168.100.2/27"
clish -c "add mcvr vrid 10 backup-address 192.168.1.1"
clish -c "add mcvr vrid 10 backup-address 192.168.100.1"
echo "adding routes"
clish -c "set static-route default nexthop gateway address 10.0.0.1 priority 1 on"
clish -c "set static-route 10.124.0.0/15 nexthop gateway address 10.0.0.1 on"
clish -c "add arpproxy address 192.168.1.10 macaddress 00:00:5e:00:01:69"
clish -c "set vrrp accept-connections on"
clish -c "set vrrp monitor-firewall off"
clish -c "set vrrp coldstart-delay 90"
clish -c "save config"
