Difference between revisions of "61k CMM"

Revision as of 06:18, 11 December 2013

Chassis Management Module CLI The Chassis Management Module (CMM) monitors and controls hardware modules in the chassis. Communication with a CMM occurs via SNMP requests from the SMO SGM. If a hardware sensor reports a problem the CMM automatically takes action or sends a report. CMMs also have a command line interface. There are two ways to connect a CMM CLI: 

Connect to the serial port on the front panel of the CMM

o

In your terminal emulation program, set the baud rate to 9600

o

Enter admin for the user name and password



Open a telnet or SSH session from one of the SGMs

o

First make sure that you have connectivity to the CMMs by pinging both

addresses: 

198.51.100.33 (routed via SSM1)



198.51.100.233 (routed from SSM2)

o

Telnet or ssh from the SGM to the CMM

o

Enter admin for the user name and password