CMM Shelf Manager CLI Command Summary
|
Command |
Parameters |
Description |
|---|---|---|
|
activate |
IPMB address FRU device ID |
Activates the specified FRU. |
|
alarm |
alarm type |
Activates or clears Telco alarms. |
|
board -v |
slot number (optional) |
Shows information about blade servers. |
|
boardreset |
slot number |
Resets the specified ATCA blade server. |
|
console |
slot number |
Opens a console session on the node blade server in the specified slot. |
|
deactivate |
IPMB address FRU device ID |
Deactivates the specified FRU. |
|
exit|quit |
|
Exits from the interpreter in interactive mode. |
|
fans |
IPMB address (optional) FRU device ID (optional) |
Shows information about fans. |
|
fru |
IPMB address (optional) FRU device ID (optional) FRU type (optional) |
Shows information about one or a group of FRUs in the shelf; FRUs are selected by type or by the parent IPM controller. |
|
frudata |
IPMB address (optional) FRU device ID (optional) block/byte offset (optional) data (optional) |
Provides raw access to the FRU. Information on the specified FRU. |
|
frudatar |
IPMB address FRU device ID File name |
Reads the FRU data area of the specified FRU and stores the data in the specified file. |
|
frudataw |
IPMB address FRU device ID File name |
Writes the FRU data in the specified file into the FRU data area of the specified FRU. |
|
fruinfo -v |
IPMB address FRU device ID |
Provides user-friendly FRU Information output. |
|
getthreshold | threshold |
IPMB address (optional) sensor name (optional) sensor number (optional) |
Shows threshold information about a specific sensor. |
|
help |
|
Shows the list of supported commands. |
|
ipmc |
IPMB address (optional) |
Shows information about one or all IPM controllers in the shelf. |
|
minfanlevel |
fan level (optional) |
Shows or sets the minimum fan level. |
|
ps -ef |grep hp |
|
Checks the openhpi status. |
|
sensor |
IPMB address (optional) sensor name (optional) sensor number (optional) |
Shows information about one or a group of sensors; sensors are selected by IPM controller address, number or name. |
|
sensordata |
IPMB address (optional) sensor name (optional) sensor number (optional) |
Shows value information for a specific sensor. |
|
sensorread |
IPMB address sensor number |
Shows raw value information for a specific sensor (ignoring any Sensor Data Record describing the sensor). |
|
setfanlevel |
IPMB address FRU device ID level |
Sets a new level for the fan controlled by the specified FRU. Use clia setfanlevel 20 3 5 to get the fans to slow down. |
|
setfanpolicy |
IPMB address FRU device ID action to be taken: ENABLE or DISABLE timeout (optional) site type (optional) site number (optional) |
Enables or disables fan trays for cooling management in addition to the Fan Geography record if this one is presented in the Shelf FRU. |
|
setthreshold |
IPMB address sensor name sensor number threshold type threshold value |
Changes a specific threshold value (upper/lower, critical/non-critical/non-recoverable) for a specific sensor. |
|
setuserlabel |
shelf name slot number name |
Configures user assigned names for the shelf and the blade servers. Blade server names are assigned to slot numbers. |
|
shelf |
subcommand, with its parameters |
Shows general information about the shelf; several subcommands allow setting shelf attributes and getting additional information about specific areas. |
|
shelfaddress |
Shelf Address string (optional) |
Gets or sets the Shelf Address field of the Address Table within Shelf FRU Information. |
|
shelf address_table |
|
Shows the address table record in the shelf FRU info with shelf address and list of address table entries. For each entry, shows hardware address, site type, and site number. |
|
shelf cooling_state |
|
Shows the current cooling state of the shelf with normal, minor, major, and critical alert information. |
|
shelf fans_state |
|
Shows the current state of the fan techometers in the shelf with normal, minor, major and critical alert information. |
|
shmstatus |
|
Shows the Shelf Manager Active/Backup status. |
|
showhost |
slot-number |
Displays version information about the firmware on certain Netra CP3x60 node blade servers. |
|
showunhealthy |
|
Shows the unhealthy components of the shelf. |
|
switchover |
|
Initiates a switchover to the backup Shelf Manager. |
|
terminate |
|
Terminates the Shelf Manager without rebooting the shelf management card. |
|
version |
|
Shows the Shelf Manager version information. |
